NEC Electra Elite IPK II General Description Manual page 9

GENERAL INFORMATION
Established Federal Communications Commission (FCC) rules permit this telephone system to be
directly connected to the telephone network. A jack is provided by the telephone company. Jacks for
this type of customer provided equipment are not provided on party lines or coin lines.
The telephone company may make changes in its technical operations and procedures. When such
changes affect the compatibility or use of the Electra Elite IPK II system, the telephone company is
required to give adequate notice of the changes.
COMPANY NOTIFICATION
Before connecting this telephone system to the telephone network, the following information must be
provided to the telephone company:
1. Your telephone number.
2. FCC registration number:
J When the system is to be installed as a Key Function system (no dial access to Trunk Groups/
Route Advance Blocks), use the following number:
NIFMUL-43074-KF-E
J When the system is to be installed as a Multifunction system, use the following number:
NIFMUL-43076-MF-E
J When the system is to be installed as a PBX Function system, use the following number:
NIFMUL-43075-PF-E
Ringer Equivalence Number (REN): 2.0B
J
J USOC jacks required: RJ21X and RJ2GX
General Description Manual
Regulatory
R-1