Table 2-1 Selectable Display Messaging Defaults - NEC Electra Elite IPK II General Description Manual

Document Revision 1
S e l e c t a b l e D i s p l a y M e s s a g i n g
An extension user can select a preprogrammed Selectable Display Message for their
extension. Display multiline terminal callers see the selected message when they call
the user's extension. Selectable Display Messaging provides personalized
messaging. For example, an extension user could select the message "GONE FOR
THE DAY". Any display multiline terminal user calling the extension may hear a DND
signal and then see the message. See table below for a list of the standard
messages.
An extension user can add digits for date, time or telephone number after messages
1~8 and 10 (up to 24 characters). For example, an extension user could select the
message "ON VACATION UNTIL" and then enter the date. Callers see the original
message followed by the appended date. They would then be able to tell when the
user was coming back from vacation. The system allows all telephones to use the
Selectable Display Messaging feature at the same time.
All telephones are able to use Selectable Display Messaging at one time.
The default messages are:
2 - 62

Table 2-1 Selectable Display Messaging Defaults

No. Message
1 IN MEETING UNTIL ##:##
2 MEETING ROOM - ########
3 COME BACK ##:##
4 PLEASE CALL ###########
5 BUSY CALL AFTER ##:##
6 OUT FOR LUNCH BACK ##:##
7 BUSINESS TRIP BACK ##/##
8 BUSINESS TRIP ##########
9 GONE FOR THE DAY
10 ON VACATION UNTIL ##/##
11~20 MESSAGE 11~20
Electra Elite IPK II
Change "#" to...
Time (when meeting done)
Room Name or extension
Time (when returning)
11 digits (telephone number)
Time (when returning)
Time (when returning)
Date (when returning)
10 digits (where reached)
Date (when returning)
Features