Selectable Display Messaging; Table 1-63 Selectable Display Messaging Defaults - NEC SL1100 Features And Specifications Manual

ISSUE 2.0
Description
An extension user can select a preprogrammed Selectable Display Message for their extension.
Display Multiline Terminal callers see the selected message when they call the user's extension.
Selectable Display Messaging provides personalized messaging. For example, an extension user
could select the message GONE FOR THE DAY. Any display Multiline Terminal user calling the
extension may hear a DND signal and then see the message. See table below for a list of the
standard messages.
An extension user can add digits for date, time or telephone number after messages 1~8 and 10 (up to
48 characters). For example, an extension user could select the message ON VACATION UNTIL and
then enter the date. Callers see the original message followed by the appended date. They could then
tell when the user is coming back from vacation. The system allows all telephones to use the
Selectable Display Messaging feature at the same time.
All telephones are able to use Selectable Display Messaging at one time.
The default messages are:

Table 1-63 Selectable Display Messaging Defaults

No.
1 IN MEETING UNTIL ##:##
2 MEETING ROOM - ########
3 COME BACK ##:##
4 PLEASE CALL ###########
5 BUSY CALL AFTER ##:##
6 OUT FOR LUNCH BACK ##:##
7 BUSINESS TRIP BACK ##/##
8 BUSINESS TRIP ##########
9 GONE FOR THE DAY
10 ON VACATION UNTIL ##/##
11~20 MESSAGE 11~20
Conditions
• The # cannot be used in a Message.
• When Selectable Display Messaging is set as DND All, all other DND modes are canceled when
Selectable Display Messaging is canceled.
Default Settings
Enabled
Features and Specifications Manual

Selectable Display Messaging

Message Change "#" to...
Time (when meeting done)
Room Name or extension
Time (when returning)
11 digits (telephone number)
Time (when returning)
Time (when returning)
Date (when returning)
10 digits (where reached)
Date (when returning)
SL1100
S
1-661