Calling Your Mailbox - NEC SL1100 Features And Specifications Manual

ISSUE 2.0
Program
Number
41-19-01 ACD Voice Mail Delay Announcement - Delay Message Start
Timer
Determine the time the system waits before playing the Delay Mes-
sage.
41-19-02 ACD Voice Mail Delay Announcement - Mailbox Number for 1st
Announcement Message
Assign Voice Mail ACD Announcement Mailbox as the message
source for the 1st Announcement Message.
41-19-03 ACD Voice Mail Delay Announcement - 1st Delay Message
Sending Count
Determine the 1st Delay Message Sending Count. This entry must
be set to 1 or higher for the message to play.
41-19-04 ACD Voice Mail Delay Announcement - Mailbox Number for
2nd Announcement Message
Assign Voice Mail ACD Announcement Mailboxes as the message
source for the 2nd Announcement Message.
41-19-05 ACD Voice Mail Delay Announcement - 2nd Delay Message
Sending Count
Determine the 2nd Delay Message Sending Count. This entry must
be set to 1 or higher for the message to play.
41-19-06 ACD Voice Mail Delay Announcement - Wait Tone Type at Mes-
sage Interval
Determine what the caller hears between the messages.
41-19-07 ACD Voice Mail Delay Announcement - ACD Forced Discon-
nect Time after 2nd Announcement
Assign the time the system waits after the end of the ACD delay
message before disconnecting.
41-19-08 ACD Voice Mail Delay Announcement - Delayed Message Inter-
val Time
Set the time between Delayed Messages.
47-03-02 InMail Group Mailbox Options - Mailbox Number
The Group Mailbox Number is the same as the Department Group
master (pilot) number. Use this option to select the Department
Group master (pilot) number associated with the Master Mailbox
you are programming.
47-03-03 InMail Group Mailbox Options - Mailbox Type
Set the Master Mailbox type.
Operation

Calling Your Mailbox

To call your mailbox:
With a Multiline Terminal, your Voice Mail key flashes green and your Message Center keys flash red
when they have messages waiting. If you do not have a Voice Mail key, your Message Waiting LED
flashes instead.
Features and Specifications Manual
Program Name/Description
SL1100
Assigned Data
0 ~ 64800 (seconds)
(default = 0)
Dial (up to eight digits)
(default = No setting)
0 = No message is played.
1 ~ 255
(default = 0)
Dial (up to eight digits)
(default = No setting)
0 = No message is played.
1 ~ 255
(default = 0)
0 = Ring Back Tone
1 = Music On Hold Tone
2 = Background Music Source
(default = 0)
0 ~ 64800 (seconds)
(default = 0)
0 ~ 64800 (seconds)
(default = 20)
Digits (eight maximum, using 0 ~ 9)
No setting (entered by pressing Hold)
(default not assigned)
0 = None
1 = Subscriber
2 = Routing
(default = 1)
I
1-367