SL1100
Description
The SL1100 has three different methods for programming. The first is via the Telephone, the second
is by PCPro and third by WebPro.
PCPro is a Microsoft Windows based application. It allows the technician/system administrator to
download a database from the system, make changes, and then upload.
The WebPro application is a browser base. It allows the technician/end user to make a change to the
P
system/terminal. No special installation program is required.
An overview of the three programming applications is shown below.
(Modem)
Connecting
As can be seen in
available to PCPro/WebPro.
PCPro, user can connect directly or remotely using a modem/LAN. A connection with the system is
made via the Connection Dialog in the application. (Refer to
page
1-577.)
• Modem (remote) connections are established via the internal VMDB modem. To access the modem,
dial a trunk that is directed to the modem access service code (DIL or DID) or dial an extension that
is redirected to the modem access service code. When connecting with a Modem, a Dial Up
Connection (PPP) must be set up in Windows Network Connections.
When uploading via a Dial Up connection, uploading card configuration (Hardware Upload) is not
supported.
• IP (LAN) connections are established by connecting the LAN cable to CPU Unit.
1-576
PCPro
K S U
Figure 1-31 PC Programming Overview
Figure 1-31 PC Programming Overview on page
PC Programming
Telephone
WebPro
PCPro
(IP)
(IP)
1-576, three connection types are
Figure 1-32 PCPro Connection Dialog on
PC Programming
ISSUE 2.0