NEC SL1100 Features And Specifications Manual page 785

Hide thumbs Also See for SL1100:
Table of Contents

Advertisement

ISSUE 2.0
• When an internal station-to-station call is made to a virtual extension, the name and number of the
calling party does not appear in the display of the station the virtual extension resides on until the
call is answered.
• A door box cannot ring a virtual extension.
• If a user dials a number not programmed in ARS, PRG 26-01-03 determines if the system should
route over the trunk group settings defined in PRG 21-02 or play an error tone.
• When using ARS Class of Service, with PRG 26-01-03 set to (1) "Play Warning Tone", Any trunk
pointed or transferred to a virtual that is Call Forward Off-Premise will not complete. For a virtual to
Call Forward Off-Premise, PRG 26-01-03 must be set to "Route to trunk group" and the call will
follow the trunk group settings of the trunk, assigned in PRG 21-03.
• When using ARS Class of Service, with PRG 26-01-03 set to (1) "Play Warning Tone" or transferred
to a virtual that is call forwarded off premise will always follow ARS Class 1 routing properties.
• Version 2.0, or higher, software supports distinctive ring tones for external calls or intercom calls
from specified extensions.
• Ringtone mode for incoming to Virtual Extension (PRG 20-04-05 is On) is followed by PRG
22-03-01 and PRG 15-02-02 for External calls and PRG 15-08-01 and PRG 15-02-02 for Intercom
call ringing. (Version 2.0 or higher)
Default Settings
Not Assigned
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Call Waiting/Camp-On
Call Arrival (CAR) Keys
Secondary Incoming Extension
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Features and Specifications Manual
SL1100
V
1-773

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents