NEC SL1100 Features And Specifications Manual page 448

SL1100
Feature Name
Meet Me Paging Transfer
Memo Dial
Message Waiting
Microphone Cutoff
Mobile Extension
Multiple Trunk Types
Music on Hold
Name Storing
I
Navigation Key
Night Service
Off-Hook Signaling
One-Touch Calling
Operator
Paging, External
Paging, External (VRS)
Paging, Internal
Park
PBX Compatibility /Behind PBX
PC Programming
Power Failure Transfer
Prime Line Selection
Private Line
Programmable Function Keys
Programming from a Multiline
Terminal
Pulse to Tone Conversion
Redial Function
Remote (System) Upgrade
Repeat Redial
Resident System Programming
Reverse Voice Over
Ring down Extension (Hotline) ,
Internal/External
Ring Groups
Room Monitor
Save Number Dialed
Secondary Incoming Extension
1-436
ML440
Yes Can initiate a Meet Me Paging Transfer but cannot re-
ceive internal pages to respond to an Internal Meet Me
Transfer page.
No
Yes ML440 only supports voice mail MWI.
Yes This is a function of the ML440 Handset.
N/A • Callback to Mobile Phone
Yes
No Callers to a ML440 hear SL1100 MOH. Calls made
from ML440 handsets do not hear MOH.
No
N/A
No
No
Yes Must press Line Key then go off hook on ML440 for
stored number to be dialed.
No A ML440 should not be used as an operator phone.
Yes A ML440 can only initiate an Internal, External or All
Call Page. It cannot receive either Internal or All Call
pages or display page information.
N/A
Yes A ML440 can only initiate an Internal, External or All
Call Page. It cannot receive either Internal or All Call
pages or display page information.
Yes
Yes
Yes • Intuition Setup
No
Yes Prime Line Selection can be assigned for a ML440,
however when this is done the phone cannot access
ICM dial tone. In addition the ML440 does not follow
PRG 20-08-21 settings.
Yes
Yes
No
No
N/A
N/A
No
N/A
No
Yes A ML440 can be a ring down destination but cannot
originate a ring down call.
Yes
No A ML440 can be monitored but cannot monitor other
extensions.
Yes
Yes
Comments
IP Multiline (SIP) - ML440
ISSUE 2.0
Note