Table 2-4 Function Key Codes By Feature - NEC SL1100 Features And Specifications Manual

ISSUE 2.0
For this fea-
Dial this Service Code...
ture...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker
key first).
Voice Response
System (VRS)
616 + 7 + Record message + # + Con-
dition (2, 4,6 or 7) + Destination +
Type (2 or 3) or 616 + 7 + 3 to cancel
612 + 3 to erase, 5 to listen or 7 to re-
616 + 3 to erase, 5 to listen or 7 to re-
Volume Control
Common Cancel-
ing Service Code
Function Key Codes by Feature
To program a key, press Speaker key, dial 751 (for 3-digit code) or 752 (for 2-digit codes), press the key
For this Use this key...
feature...
Speed Dial- Code: 27
ing Operation: Press key +
bin + Line or Hold key
Code: 28
Operation: Press key +
bin + Line or Hold key
Account Code: 50
Codes Operation: Press key +
Dial Account Code
Features and Specifications Manual
1
** + ringing ext.
4 (On-Hook)
6 (On-Hook)
8 (On-Hook)
611
cord
cord
750
782
729
* 9

Table 2-4 Function Key Codes by Feature

and enter the code (e.g., 48 for Voice Over).
When you ...
Dial a stored System
Speed Dialing num-
ber.
Dial a stored Group
Speed Dialing num-
ber.
Enter Account Codes.
When you ...
Pick up a call ringing another exten-
sion for Directed Call Pickup or VRS
Park and Page.
Record, listen to or erase a Person-
al Greeting or Park and Page.
Listen to the General Message.
Check an extension number.
Listen for the time.
Use SLT to listen to the General
Message.
Record, listen to or erase the Gen-
eral Message.
Record, listen to or erase a VRS
Message.
Camp On to an extension when call-
ing into the system through the
VRS.
Transfer a call to the VRS. This can
be used also to route ANI/DNIS to
the VRS.
Check or change ring volume.
Use Common Canceling Service
Code.
Key Lamp Status
None
None
None
SL1100
Also see Note
Function
Key...
-
-
-
-
-
-
-
-
-
-
-
-
Also See Srvc Note
Code
#2 + bin
#4 + bin
* + Enter Account
Code + *
2-15