NEC SL1100 Features And Specifications Manual page 241

ISSUE 2.0
Program
Number
22-07-01 * DIL Assignment
Per trunk, per day/night mode, assign the destination extension or pi-
lot number that the trunk is to be routed to.
22-01-04 DIL/IRG No Answer Destination Timer
A call will ring the DIL destination for the specified amount of time pro-
grammed. Once the timer expires, and the call was not answered, the
call will now overflow to the destination set in PRG 22-08-01.
22-08-01 DIL/IRG No Answer Destination
After the timer in PRG 22-01-04 expires the call will be sent to the lo-
cation programmed within this program.
Operation
To answer a call on your Direct Inward Line:
1. Lift the handset.
2. Press the flashing line key for DIL on the Multiline Terminal.
• Pressing the flashing line key puts the first call on hold and answers the second incoming call.
This can be repeated until all incoming calls are answered.
• If you have Ringing Line Preference, lift the handset to answer the call.
• If you do not answer the call, it may ring other extensions (i.e., the DIL No Answer Ring Group).
To place a call on your Direct Inward Line:
1. Lift the handset.
2. At the Multiline Terminal, press the line key for DIL.
- OR -
Dial #9 and the DIL trunk number (e.g., 05).
- OR -
Dial 704 and the DIL trunk group number (e.g., 05).
- OR -
Dial 9 for Trunk Group Access.
3. Dial the number.
Features and Specifications Manual
Program Name/Description
SL1100
Assigned Data
Maximum of 8 digits (0 ~ 9, * , #)
(default = Not Assigned)
0 = No Overflow
1 ~ 64800 = 1 ~ 64800 seconds
(default = 0)
0 = No Setting
1 ~ 25 = Ring Group 1 ~ 25
102 = Voice Mail (Call goes to the
VM pilot assigned in PRG 45-01-01.)
1-229
D