NEC SL1100 Features And Specifications Manual page 776

SL1100
Guide to Feature Programming
Program Num-
ber
10-19-01
10-46-11
10-46-12
11-12-19
15-05-38
U
15-07-01
20-06-01
20-13-29
31-01-01
31-01-02
31-02-01
31-02-02
31-03-01
31-07-01
Operation
To make an Internal Page announcement:
Multiline Terminal/IP Terminal
1. Press the zone Internal Paging key (PRG 15-07 or SC 751: 21 + 0 or 1~9 or 01~32 for zones (0
or 00 for All Call).
- OR -
Press Speaker key or lift the handset. Dial 701 and the Paging Zone number (0~9 or 00~32).
Dialing 0 or 00 calls All Call Internal Paging.
- OR -
Dial * 1 and the Combined Paging Group code 1~8 or 0 (for Internal/External All Call).
Display indicates the Combined Paging as an External Page.
If the Internal Page Zone is busy or if there are no extensions in a page group, the page is announced
as an External Page only.
1-764
Program Name
VoIP DSP Resource Selection
Multicast IP Address
Multicast Port
Service Code Setup (for Service Access) - Internal Group
Paging
IP Telephone Terminal Basic Data Setup - Paging Proto-
col Mode
Programmable Function Keys
Class of Service for Extensions
Class of Service Options (Supplementary Service) - Pag-
ing Display
System Options for Internal/External Paging - All Call
Paging Zone Name
System Options for Internal/External Paging - Page An-
nouncement Duration
Internal Paging Group Assignment - Internal Paging
Group Number
Internal Paging Group Assignment - Internal All Call Pag-
ing Receiving
Internal Paging Group Settings - Internal Paging Group
Name
Combined Paging Assignments
ISSUE 2.0
Default
Resource 1 = 1
Resource 2 ~ 32 = 0
224.0.0.10
30000
701
0
Refer to Programmming Manual
Extension 101 is Class 15 and other Ex-
tension are Class 1
COS 01~15 = 1
Group all
1200 (seconds)
0 for IP Station 1 for TDM Station
Port 1~16 = 1 (Group)
Port 17 = 0
0 = Off
1 = On
All Stations = 0
Up to 12 Characters
01 = Group 1
02 = Group 2
:
32 = Group 32
1
Unicast/Multicast Paging Mode