NEC SL1100 Features And Specifications Manual page 706

SL1100
Using the above method the caller will not log into their own box. The caller will be prompted to enter
the extension number they wish to use.
For the caller to log directly into the Voice Mail box of the calling extension:
1. At a Multiline Terminal, press Speaker key or Lift the Handset.
- OR -
At a Single Line telephone, lift the handset.
2. Dial the Voice Mail access code of
A multiline telephone user may also:
S
1. Press the VM Soft Key in the display of the Multiline telephone.
A user may want a line key programmed to indicate if another extension has Voice Mail messages.
When a message is left for the extension, which is programmed under this key, the LED will flash
indicating the user has a Voice Mail Message. This same line key, when pressed, will log the user
directly into the associated mailbox.
To program a Voice Mail key on a Multiline telephone:
1. Press Speaker key.
2. Dial 751 (PRG 11-11-17).
3. Press the key you want to program.
4. Dial 77 (PRG 15-07-01).
5. Dial the number of the extension you want to appear on the key.
6. Press Speaker key.
Network Busy Lamp Field (BLF) indication
An extension user can see the status of other extensions throughout the network as if they were all in
the same system. The BLF keys will show the status for idle, busy, DND, and Call Forward All. This
same key provides one-button access to extensions and system features throughout the network. This
saves time for users that do a lot of call processing (e.g., attendants, operators, or dispatchers). Lamp
status may not be updated immediately. Status will be updated in the time interval specified in PRG
20-01-04.
Operation
To program a DSS/BLF key on a Multiline telephone:
1. Press Speaker key.
2. Dial 751 (PRG 11-11-17).
3. Press the key you want to program.
4. Dial 01 (PRG 15-07-01).
5. Dial the number of the extension you want to appear.
6. Press Hold key.
7. Press Speaker key.
Network Paging
Users can perform Internal, External, or Combined page to any system in the network. Paging to a
networked system can only be activated by dialing a service code and the target network's system ID.
1-694
* 8 (PRG 11-12-51).
ISSUE 2.0
SL Net