NEC SL1100 Features And Specifications Manual page 123

ISSUE 2.0
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Call Waiting
Program
Number
15-02-12 Off Hook Ringing
Per Station use this option to set the telephone Off-Hook signaling
type that occurs when a user receives a second call while busy on a
handset call.
20-09-01 Second Call for DID/DISA/DIL/E&M
This option enables or disables a users ability to receive a second call
from a DID, DISA, DIL, or E&M Tie line per class of service (PRG
20-06-01).
20-09-07 Call Queuing
This option enables or disables a users ability to have calls queued if
a call rings the extension when it is busy.
20-13-05 Intercom Off Hook Signaling
This option enables or disables a users ability to receive off hook sig-
nals.
20-13-06 Automatic Off Hook Signaling
This option enables or disables the users ability to manually or auto-
matically receive off hook signals.
20-18-06 Interval of Call Waiting Tone
This program allows you to adjust the time between call waiting/off
hook signaling tones.
Below is a chart that shows setting data for certain call waiting scenarios.
Internal Call to Station on Inter-
nal Call
Station on Trunk
call
DID Call to Station on Inter-
nal Call
Station on Trunk
Call
Features and Specifications Manual
Program Name/Description
Busy Signal:
No call forwarding
20-09-07 = Off
20-13-06 = Off
24-09-05 = Off
20-09-07 = Off
20-13-06 = Off
24-09-05 = Of
20-09-01 = Off
20-09-07 = Off
24-09-04 = Off
20-09-01 = Off
20-09-07 = Off
24-09-04 = Off
Assigned Data
0 = Muted Off-Hook Ringing
1 = No Off-Hook Ringing
3 = Beep in Speaker
4 = Beep in Handset
5 = Beep in Speaker and Handset
(default = 0)
0 = Off (2nd call will not be allowed.)
1 = On (2nd call is allowed.)
(default = 1)
0 = Off (Calls are not queued.)
1 = On (Calls are queued.)
(default = 1)
0 = Off (ICM off hook signaling disa-
bled.)
1 = On (ICM off hook signaling ena-
bled.)
(default = 1)
0 = Off (manually)
1 = On (automatically)
(default = 1)
0 ~ 64800 = 0 ~ 64800 seconds
(default =10 seconds)
Ring Back Signal: Busy forwarding imme-
Caller queues at called diately upon Busy
Station
20-13-06 = On *1
*1
20-13-06 = On
20-09-01 = On
20-09-07 = On
20-09-01 = On
20-09-07 = On
SL1100
C
20-09-07 = Off
20-13-06 = Off
24-09-05 = On
20-09-07 = Off
20-13-06 = Off
24-09-05 = On
20-09-01 = Off
20-09-07 = Off
24-09-04 = On
20-09-01 = Off
20-09-07 = Off
24-09-04 = On
1-111