Built-In Automated Attendant - NEC SL1100 Features And Specifications Manual

ISSUE 2.0
Description
SL1100 provides Built-in Automated Attendant feature. This feature uses a PZ-VM21 mounted on the
CPU unit, but does not use a CF card. Voice prompts or messages are stored in a flash memory on
the CPU unit.
Conditions
• This feature uses a PZ-VM21 mounted on the CPU and supports a 2-port Built-in Automated
Attendant feature. Voice Mail features are not supported. To use the Voice Mail feature, VM CF
must be installed on the PZ-VM21.
• For fixed messages, 1 language is available in SL1100. Default language is "US English".
• Call Routing Mailbox (maximum of 8) can be used for Built-in Automated Attendant.
• Automated Attendant (Operator Assistance) feature is not supported.
• Up to two ACD Delay Announcements are supported. (V1.5 or higher)
• ACD queue depth announcements are not supported when using Embedded VRS for ACD delay
Announcement. If enabled, the first ACD Delay Announcement repeats continuously. (V1.5 or
higher)
Default Settings
None
System Availability
Terminals
All Multiline Terminals, Analog telephone
Required Component(s)
PZ-VM21
Related Features
Automatic Call Distribution (ACD) (V1.5 or higher)
Voice Response System (VRS)
InMail - Automated Attendant
Features and Specifications Manual

Built-in Automated Attendant

SL1100
B
1-75