NEC SL1100 Features And Specifications Manual page 761

ISSUE 2.0
Program Num-
ber
20-02-04 System Options for Multiline Telephones - Retrieve the
Line After Transfer
20-03-01 System Options for Single Line Telephones - SLT Call
Waiting Answer Mode
20-06-01 Class of Service for Extensions
20-09-07 Class of Service Options (Incoming Call Service) - Call
Queuing
20-11-06 Class of Service Options (Hold/Transfer Service) -
Unscreened Transfer (Ring Inward Transfer)
20-11-07 Class of Service Options (Hold/Transfer Service) - Transfer
Without Holding
20-11-08 Class of Service Options (Hold/Transfer Service) - Transfer
Information Display
20-11-11 Class of Service Options (Hold/Transfer Service) - Auto-
matic On-Hook Transfer
20-11-18 Class of Service Options (Hold/Transfer Service) - No Re-
call
20-11-20 Class of Service Options (Hold/Transfer Service) - No Call-
back
20-13-06 Class of Service Options (Supplementary Service) - Auto-
matic Off-Hook Signaling (Automatic Override)
20-13-10 Class of Service Options (Supplementary Service) - Barge-
In Monitor
20-13-15 Class of Service Options (Supplementary Service) - Barge-
In, Initiate
20-13-16 Class of Service Options (Supplementary Service) - Barge-
In, Receive
20-13-17 Class of Service Options (Supplementary Service) - Barge-
In Tone/Display (Intrusion Tone)
20-13-32 Class of Service Options (Supplementary Service) - Deny
Multiple Barge-Ins
20-14-11 Class of Service Options For DISA - DISA/Tie Trunk Barge-
In
20-18-07 Service Tone Timers - Intrusion Tone Repeat Time
21-01-03 System Options for Outgoing Calls - Trunk Interdigit Time
(External)
22-04-01 Incoming Extension Ring Group Assignment
22-05-01 Incoming Trunk Ring Group Assignment
22-08-01 DIL/IRG No Answer Destination
24-02-01 System Options for Transfer - Busy Transfer
24-02-02 System Options for Transfer - MOH or Ringback on Trans-
ferred Calls
24-02-03 System Options for Transfer - Delayed Call Forwarding
Time
24-02-04 System Options for Transfer - Transfer Recall Time
24-02-05 System Options for Transfer - Message Wait Ring Interval
Time
25-06-01 VRS/DISA One-Digit Code Attendant Setup - Next Attend-
ant Message Number
Features and Specifications Manual
Program Name
SL1100
Default
1
0
Extension 101 is Class 15 and other Ex-
tension are Class 1
COS 01~15 = 1
COS 01~15 = 1
COS 01~15 = 0
COS 01~15 = 1
COS 01~15 = 0
COS 01~15 = 0
COS 01~15 = 0
COS 01~15 = 1
COS 01~15 = 0
COS 01~15 = 0
COS 01~15 = 0
COS 01~15 = 1
COS 01~15 = 0
COS 01~15 = 0
0 (seconds)
5 (seconds)
Extension 101~108 (first eight ports) ring
for incoming Ring Group 1 calls. No oth-
er extensions ring for incoming Ring
Group 1 calls.
1
1
1
0
10 (seconds)
30 (seconds)
30 (seconds)
0
T
1-749