NEC SL1100 Features And Specifications Manual page 605

ISSUE 2.0
Link Description
BRI Indicate Icon, Name and
number of Line
PRI Indicate Icon, Name and
number of Line
VOIP Indicate Icon, Name and
number of Trunk
LAN Indicate Icon and Name
(CPU)
MOH Indicate Icon and Name
BGM Indicate Icon and Name
Paging Indicate Icon and Name
InMail Indicate Icon, Name and
number of InMail
T1 Indicate Icon, Name and
number of Line
At Intuition Setup following two programming method is newly supported.
• IRG (Incoming Ring Group) settings.
• Function Key settings for BGM and External paging.
Detail features are described in below section.
IRG Settings
In Intuition Setup IRG Setting handles Ring Group number. When new Ring Group configuration (new
member group) is created, new Ring Group number is generated automatically.
For example, from the KSU View, click the Analog trunk figure to be set IRG setting.
Features and Specifications Manual
System Data
PRG 10-03-01 (BRI): ISDN Line Mode
PRG 10-03-02 (BRI): Logical Port Number
PRG 14-01-01: Trunk Name
PRG 10-03-03 (BRI): Connection Type
PRG 22-04/22-05: IRG settings
PRG 10-03-01 (PRI): ISDN Line Mode
PRG 10-03-02 (PRI): Logical Port Number
PRG 14-01-01: Trunk Name
PRG 10-03-03 (PRI): CRC Multi-frame (CRC4)
PRG 22-04/22-05: IRG settings
PRG 14-01-01: Trunk Name
PRG 22-04/22-05: IRG settings
PRG 10-12-09: IP Address
PRG 10-12-10: Subnet Mask
PRG 10-29-14: SIP Carrier Choice
PRG 10-40-01: IP Trunk Availability
PRG 10-40-02: Number of Ports
PRG 10-28-01: Domain Name
PRG 10-28-02: Host Name
PRG 10-28-03: Trans Port Protocol
PRG 10-28-04: User ID
PRG 10-28-05: Domain Assignment
PRG 10-29-01: Default Proxy (Outbound)
PRG 10-29-02: Default Proxy (Inbound)
PRG 10-29-03: Default Proxy IP Address
PRG 10-29-04: Default Proxy Port Number
PRG 10-29-05: Register Mode
PRG 10-29-06: Register IP Address
PRG 10-29-07: Register Port Number
PRG 10-12-01: IP Address
PRG 10-12-02: Subnet Mask
PRG 10-12-03: Default Gateway
PRG 10-04-01: MOH Source Selection
PRG 10-04-02: MOH Tone Selection
PRG 10-61-01: Relay Type
PRG 10-61-02: Destination Selection
PRG 15-07-01: Function Key settings
PRG 31-04-01: External Paging Zone Group selection
PRG 31-10-01: External Speaker Name
PRG 15-07-01: Function Key settings
PRG 47-01-17: InMail Port
PRG 11-07-01: Department Group Pilot Number
• At PRG 11-07 InMail group pilot number can be set.
PRG 14-01-01: Trunk Name
PRG 22-04/22-05: IRG settings
PRG 10-03-03 (T1): Zero Code Suppression
SL1100
Note
P
1-593