NEC SL1100 Features And Specifications Manual page 17

ISSUE 2.0
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Account Code Entry
Automatic Route Selection (ARS/F-Route)
Central Office Calls, Placing
Code Restriction/Toll Restriction
Dial Tone Detection
One-Touch Calling
PBX Compatibility/Behind PBX
Programmable Function Keys
Single Line Terminals
Trunk Group Routing
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
System Speed Dial
Program
Number
13-01-01 Speed Dial Auto Outgoing Call Mode
Assign if the speed dial bins use trunk group routing or intercom ac-
cess.
If the bins are assigned as trunk group routing do not add the trunk
access code in front of the number when programming the entries. If
the bins are assigned as intercom access then the trunk group access
code must be programmed in front of the number.
Features and Specifications Manual
Program Name/Description
SL1100
Assigned Data
0 = Trunk Outgoing Mode (Use
trunk group assigned in PRG 13-05.)
1 = Intercom Outgoing Mode (Fol-
low the system routing for the trunk
access code entered.)
(default = 0)
A
1-5