NEC SL1100 Features And Specifications Manual page 487

ISSUE 2.0
Related Features
Central Office Calls, Answering
Central Office Calls, Placing
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
E911 Compatibility
Forced Trunk Disconnect
Programmable Function Keys
Station Message Detail Recording
Transfer
Guide to Feature Programming
Program
Number
10-03-16 ETU Setup – PRI Service Two B-Channel Transfer
14-01-13 Basic Trunk Data Setup – Trunk-to-Trunk Transfer
15-07-01 Programmable Function Keys (Transfer = 06)
20-02-08 System Options for Multiline Telephones – LCD Display Holding Time
20-11-11 Class of Service Options (Hold/Transfer Service) – Automatic On-Hook
Transfer
20-11-14 Class of Service Options (Hold/Transfer Service) – Trunk-to-Trunk Trans-
fer Restriction
20-11-21 Class of Service Options (Hold/Transfer Service) – Restriction for Tandem
Trunking on Hang Up
20-25-15 ISDN Options – Call Reference Selection for PRI 2 B-Channel Transfer
24-02-09 System Options for Transfer – Two B-Channel Transfer Retry Timer
Operation
To Perform an ISDN 2 B-Channel Transfer:
1. Receive or make an ISDN trunk call.
2. Go off-hook using the handset, or press Speaker key (the Call Appearance key or direct trunk
appearance lights). Talk with the outside party.
3. Press Transfer key.
4. Dial 9 to access second ISDN trunk.
5. Dial the outside number and wait for the outside party to answer.
6. Hang up.
7. LCD returns to idle after the LCD Display Hold timeout (PRG 20-02-08).
Features and Specifications Manual
Program Name
SL1100
Default
0
1
Refer to Programming
Manual.
(Code 752 by default)
5
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
0
10
1-475
I