Traffic Reports - NEC SL1100 Features And Specifications Manual

ISSUE 2.0
Related Features
PBX Compatibility/Behind PBX

Traffic Reports

Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program Program Name/Description
Number
10-20-01 * TCP Port
Assign a valid TCP port to external device 5
(SMDR Output).
It is recommended to not use ports 1 ~ 1023.
14-01-06 SMDR Printout - Per Trunk
This option can include/exclude trunks from be-
ing reported in the SMDR printout.
If a trunk is set to No Print Out (setting data of 0)
any calls made or received on this line will not be
reported in the SMDR printout.
15-01-03 SMDR Printout - Per Station
This option can include/exclude stations from be-
ing reported in the SMDR printout.
If a station is set to No Print Out (setting data of
0) any calls made or received on this station will
not be recorded in the SMDR printout.
15-01-14 SMDR Output of Made Intercom calls
When set 0 it will not record the internal calls that
been made
15-01-15 SMDR output of answered intercom calls
When set 0 it will not record the internal calls that
been received
16-02-01 Extension Group Setting
Setting up the Extension group
35-01-01 SMDR Output Port Type
This enables/disables the SMDR data from being
sent out of the SL1100.
35-02-21 S-Point Terminal number
Set up the SMDR Port
10- 12-01 IP Address
Assign the IP Address for the CPU's NIC card.
If a VoIPDB is installed in the system it is recom-
mended to set this to 0.0.0.0 and all connections
to the system will be made through the VoIPDB.
10-12-02 Subnet Mask
Assign the subnet mask for the CPU's NIC card.
If a VoIPDB is installed in the system it is recom-
mended to set PRG 10-12-01 to equal 0.0.0.0
and leave this program set to default.
Features and Specifications Manual
Assigned Data
0 ~ 65535
(default = 0)
0 = No (trunk will not be reported in the
SMDR print out.)
1 = Yes (trunk will be reported in the SMDR
print out.)
(default = 1)
0 = None (station will not be reported in the
SMDR print out.)
1 = Yes (station will be reported in the SMDR
print out.)
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
1- 64
(default = 1)
0 = Not Set (SMDR disabled)
3 = LAN (SMDR enabled and sent out of the
LAN port.)
(default = 3)
0 = MSN Number
1 = Extension Number
(default = 0 )
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
(default = 192.168.0.10)
Refer to the programming manual for all the
possible valid subnet mask entries.
(default = 255.255.255.0)
SL1100
S
(V2.0 Added)
(V2.0 Added)
(V2.0 Added)
(V2.0 Added)
1-713