Figure 1-15 Time Schedule 1 - NEC SL1100 Features And Specifications Manual

ISSUE 2.0
If power cutting set "on" manually during scheduled power cutting "off" state, power cutting "on" state
continues until next power cutting "off" time.
The system does not start the cutting telephone power until next schedule.
Time schedule
0:00 6:00
Operation
0:00 6:00
Cancel the cutting telephone power by manual operation.
Power "off" state
Power "on" state
Vice versa if power cutting is set "off" manually during scheduled power cutting "on" state, power
cutting "off" state continues to next power cutting "on" time.
The system does not start the power supply until next schedule.
Time schedule
0:00 6:00
Operation
0:00 6:00
Power "off" state
Power "on" state
• During power cutting "off" state,
- Outgoing calls can not be made.
- Incoming calls receive a busy tone.
- Call forward features work at the forward set terminal.
- Disables Both Ring CFW / Follow Me.
Power saving mode
• The system activates power saving mode when the Multiline Terminal is idle or no incoming calls
are received during the programmed time period. This darkens the brightness of all Line Key and
feature key LED's on the Multiline Terminal. This feature does not affect the display of the terminal.
• Power saving mode can be set for each terminal individually.
• Any key operation or incoming call at the terminal ends the power saving mode and all LEDs return
to normal brightness.
Features and Specifications Manual
19:00 0:00
19:00 0:00

Figure 1-15 Time Schedule 1

19:00 0:00
19:00 0:00
Set the cutting telephone power by manual operation.
Figure 1-16 Time Schedule 2
6:00 19:00
6:00 19:00
6:00 19:00
6:00 19:00
SL1100
0:00
0:00
E
0:00
0:00
1-261