Dimension Drawing - Siemens SIMATIC Ident System Manual

Transponder
7.15 MDS D421
Recommended distance to metal
Power supply
Permitted ambient conditions
Ambient temperature
•
•
Degree of protection to EN 60529
Shock-resistant to EN 60721-3-7 class 7M3
Vibration-resistant to EN 60721-3-7, class 7M3
Torsion and bending load
Design, dimensions and weight
Dimensions (Ø x H)
Weight
Type of mounting
The values for shock and vibration are maximum values and must not be applied continuously.
1)
The manufacturer's processing instructions must be observed.
2)
7.15.5

Dimension drawing

Dimensions in mm
Figure 7-39
250
During operation
During transportation and storage
Dimension drawing of MDS D421
> 25 mm
Inductive, without battery
-25 to +85 ℃
•
-40 to +100 ℃
•
IP67
•
IPx9K
•
steam jet: 150 mm; 10 to 15 l/min; 100 bar; 75
°C
100 g
1)
20 g
1)
Not permitted
10 x 4.5 mm
Approx. 1 g
Glued
2)
System Manual, 07/2015, J31069-D0227-U001-A9-7618
6GT2600-4AE00
SIMATIC RF200