Table 7-3 Rear Transition Module Cables - Motorola CPCI-6020 Installation And Use Manual

Transition Module Preparation and Installation
Table 7-2 Rear Transition Module Connectors/Headers (continued)
Type
Serial Port 4
Floppy Power
PLD JTAG
COM1 Port
Speaker Header

Table 7-3 Rear Transition Module Cables

Part Number
User-supplied
User-supplied
User-supplied
Supplied with CPCI-6020-
MCPTM-01
User-supplied
User-supplied
CA-8205E
User-supplied
CA27
(requires: CA-8205E)
XR346HD26DB25-K
142
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Number Description
J17 3-pin header for selection of DTE or DCE interface
J18 Stand-alone 4-pin power header for floppy
J19 8-pin programming header
J20 3-pin header sets serial port 1 from PIM or CPCI-6020
J21 For onboard speaker access.
Description
EIA-232-D DTE or DCE cable
20-conductor cable; usually supplied with the modem
6-conductor cable; usually supplied with the modem
Keyboard/mouse Y-adapter cable (Motorola Part Number 30-
W2309E01A)
40-line flat ribbon cable with 40-pin header connectors for EIDE drives
34-line flat ribbon cable with 34-pin header connectors for floppy drive
Y-adapter cable, HD-50 male connector to two HD-26 female
connectors.
2-line cable with 2-pin header connector for speaker
Straight-through adapter cable to attach a DB-25 male connector to an
HD-26 female connector, 15 feet long. May be used for EIA-232-D
applications
Straight-through adapter cable to attach a DB-25 female connector to
an HD-26 male connector, 12 feet long
Connectors and Cables