Setting/Clearing A Password; Setting A Password; Clearing A Password - Hitachi SJ700-2 Series Instruction Manual

Chapter 4 How To Use EzSQ

4.17 Setting/Clearing a Password

- You can set a password to lock a downloaded program.
- The program locked with a password cannot be uploaded or downloaded.

4.17.1 Setting a password

- Select "Password setting and release" from the "Setting" menu in the "Program Editor" window.
- The " Password setting and release " window appears.
(The "Password for confirmation" field appears only when no password has been set for the relevant
program. If a password has already been set for the program, Only the "Password" field described below
for clearing a password appears.)
<1> Enter a password that consists of up to eight alphanumeric characters in the "Password" and "
Password for confirmation" fields.
<2> Click the "setting" button to register the password in the inverter.
Note: You cannot clear the set password by user-setting initialization on the inverter.
To clear the set password, perform the password clearance operation described below.

4.17.2 Clearing a password

<1> Enter a password that consists of up to eight alphanumeric characters in the "Password" fields.
<2> Click the "release" button to clear the password in the inverter.
Note: You can set or clear a password only while the inverter is online. Any attempt to set or clear a
password while the inverter is offline will result in an error message being displayed
4 - 20