Block Variable And Data Types For Fc501 - ABB ACS355 Series Quick Start Up Manual

Block variable and data types for FC501

Block variable Data type
PZD3_OUT INT
PZD4_OUT INT
PZD5_OUT INT
PZD6_OUT INT
PZD7_OUT INT
PZD8_OUT INT
PZD9_OUT INT
PZD10_OUT INT
PZD2_SCALED REAL
PZD3_SCALED REAL
PZD4_SCALED REAL
PZD5_SCALED REAL
PZD6_SCALED REAL
PZD7_SCALED REAL
PZD8_SCALED REAL
PZD9_SCALED REAL
PZD10_SCALED REAL
Drive BLOCK_DB
Comment
Write PZD3 value to the drive
Write PZD4 value to the drive
Write PZD5 value to the drive
Write PZD6 value to the drive
Write PZD7 value to the drive
Write PZD8 value to the drive
Write PZD9 value to the drive
Write PZD10 value to the drive
Read PZD2 (actual speed / ACT) value from the drive, the default scaling
value corresponds to -20 000 to 20 000 → -100 to 100
Read PZD3 value from the drive, the default scaling value is 1 = no
scaling
Read PZD4 value from the drive, the default scaling value is 1 = no
Scaling
Read PZD5 value from the drive, the default scaling value is 1 = no
Scaling
Read PZD6 value from the drive, the default scaling value is 1 = no
Scaling
Read PZD7 value from the drive, the default scaling value is 1 = no
Scaling
Read PZD8 value from the drive, the default scaling value is 1 = no
Scaling
Read PZD9 value from the drive, the default scaling value is 1 = no
Scaling
Read PZD10 value from the drive, the default scaling value is 1 = no
scaling
Instance Data Block. The drive variable is used for identifying to which
drive FC501 ACS_DRIVE_PZD belongs. The Instance Data Block of
FB500 ABB_DRIVE_CONTROL_FB must correspond to the variable
FC501 ACS_DRIVE_PZD drive of the same drive.