Troubleshooting - Silvercrest SDWP 180 A1 Operating Instructions Manual

15. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
WARNING! Risk of material damage
Do not attempt to repair the device
yourself under any circumstances.
Possible causes /
Fault
Action
No func- Have the batteries 8 been insert-
tion ed?
• Did you create a profile? See
"Setting the profile" on
No diag- page 10.
nostic val- • Did you select the profile prior
ues to the measurement? See "Per-
forming the measurement" on
page 11.
Batteries 8 almost empty. Insert
Display:
new batteries. See "Replacing bat-
Lo
teries" on page 15.
Measurement error: value for body
fat percentage too low.
• Check the data in the profile.
Display:
See "Setting the profile" on
ErrL
page 10.
• See "Tips for accurate diag-
nostic results" on page 11.
Measurement error: value for body
fat percentage too high.
• Check the data in the profile.
Display:
See "Setting the profile" on
ErrH
page 10.
• See "Tips for accurate diag-
nostic results" on page 11.
Possible causes /
Fault
Action
Measurement error: skin contact in-
sufficient. Perform the measure-
Display:
ment with bare feet, possibly
Err
moisten soles slightly prior to the
measurement.
Measurement error: excessive
movement during the measure-
Display:
ment. Try to stand calmly distribut-
UnSt
ing the body weight evenly onto
both legs.
17
GB