Appendix 12
This section shows the procedure for replacing a battery.
For the battery life, refer to the following page.
Page 89 Battery Life
Precautions
• Turn OFF the power supply of this product before replacing the battery.
• When removing the battery, hold the battery connector in order to prevent damage to the battery cable.
• When closing the CFast/BATTERY cover of the product, ensure that the battery cable is not caught.
• After installing the battery, configure clock settings in MI Configurator. (MI Configurator Operating Manual)
APPX
172
Appendix 12 Battery Replacement
Battery Replacement
(1)
(2)
(3)
(4)
1.
Open the CFast/BATTERY cover.
2.
Remove the battery connector (2) from the connector
(1).
3.
Remove the battery from the battery holder (3).
4.
Insert the battery into the battery holder (4).