Siemens SINUMERIK 840D sl Function Manual page 81

The following error that arises depends on:
● Position control loop gain
MD32200 $MA_POSCTRL_GAIN (servo gain factor)
● Maximum acceleration
MD32300 $MA_MAX_AX_ACCEL (maximum axis acceleration)
● Maximum velocity
MD32000 $MA_MAX_AX_VELO (maximum axis velocity)
● With activated feedforward control:
Precision of the path model and the parameters:
MD32610 $MA_VELO_FFW_WEIGHT (factor for the velocity feedforward control)
MD32800 $MA_EQUIV_CURRCTRL_TIME (equivalent time constant current control loop
for feedforward control)
MD32810 $MA_EQUIV_SPEEDCTRL_TIME (equivalent time constant speed control loop
for feedforward control)
In the acceleration phase, the following error initially increases when traversing along a
machine axis. After a time depending on the parameterization of the position control loop, the
following error then remains constant in the ideal case. Due to external influences, more or
less large fluctuations in the following error always arise during a machining process. To
prevent these fluctuations in the following error from triggering an alarm, a tolerance range
within which the following error may change must be defined for the following-error monitoring:
MD36400 $MA_CONTOUR_TOL (Contour monitoring tolerance range)
Figure 3-1
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Following-error monitoring
A3: Axis Monitoring, Protection Zones
3.2 Axis monitoring functions
81