Using The Mm910 Webui To Collect Converged Switching Plane Information; Configuring An Ftp Server - Huawei CX320 User Manual

CX320 Switch Module
User Guide
6.7 Using the MM910 WebUI to Collect converged
switching plane Information
This topic describes how to use the MM910 WebUI (MM910 software version: 6.00 or later)
to collect logs of the converged switching plane (switching plane software version: 5.30 or
later).
Prerequisites
To use the one-click full collection function of the MM910 to collect converged switching
plane logs, the following two conditions must be met:
l
l
Procedure
Step 1 Log in to the MM910 WebUI.
For details, see
Step 2 Choose System Management > Information Collection and set the information collection
parameters.
l
l
Step 3 Click Start Collection to start collecting logs.
Figure 6-11 Information collection
Step 4 In the displayed dialog box, click Save and save the log file to the local PC.
Step 5 Decompress the one_touch_info_all.tar.gz file. The collected logs of the converged
switching plane are in the swin_fru2 folder.
----End

6.8 Configuring an FTP Server

Configure an FTP server to transfer files from a PC to a switching plane.
Issue 09 (2019-08-02)
The MM910 software version is 6.00 or later.
The converged switching plane software version is 5.30 or later.
6.5 Logging In to the MM910
Collected from: Select MM.
Collected content: Select One-click full collection.
NOTE
n is the switch module or passthrough module slot number and ranges from 1 to 4.
Copyright © Huawei Technologies Co., Ltd.
WebUI.
6 Common Operations
99