Huawei CX320 User Manual page 66

CX320 Switch Module
User Guide
Issue 09 (2019-08-02)
Figure 4-3 Connection between the local PC and the active MM910 (in slot MM2
in this example)
– If the MGMT port of the active MM910 is unavailable, connect the PC to the
STACK port of the active MM910. If the STACK port is used to stack the MGMT
port in another chassis, connect the PC to an idle STACK port on an active MM910
in a chassis cascaded with the E9000 chassis.
If the MGMT port on the active MM910 is already connected with a network cable,
do not remove the network cable from the MGMT port. Otherwise, an active/
standby switchover of the MM910s will be triggered, which may cause network
interruption.
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the CX320
Figure 4-4 shows the connection.
60