Setting Procedure
3.3 Settings of Connection Using FP0H as Originator
3.3.1 Settings
This section describes the setting method of the connection using the FP0H as originator.
The FP0H(A) in the figure below is an object for the setting.
Ten word data is sent from the data area (LD40 to 49) of the FP0H(B) to the data area (LD40
to 49) of the FP0H(A).
Originator
Target
: Opens connection.
• Add the FP0H(B) to the scan list of the FP0H(A).
• Set the data area of FP0H(B) by specifying the tag (Tag_Test2).
• Set the data area of the own unit for the tag (Tag_Test2).
3-8
FP0H(A)
IP:192.168.1.6
FP0H(B)
IP:192.168.1.7
LD30
LD39
Tag_Test2
LD40
LD49
Tag_Test2
LD40
LD49
: Sends cyclic data.
Add in Scan List.