Display Contents Of Calculate Load Factor Screen - Panasonic AFP0HC32ET User Manual

4.3.4 Display Contents of Calculate Load Factor Screen

The display contents of the Calculate Load Factor screen are as follows.
①
②
③
(1) Whole Unit Communication Load Factor
Item
Unit Load Factor
Whole Unit (pps)
Whole Unit (Mbps)
Receive (pps)
Send (pps)
(2) I/O Map communication Load State
Shows the calculation result of the communication load of the communication in which the
FP0H is target.
Item
Load Factor Breakdown
Tag Name [Instance ID]
Scheduled Number of
Connected Units
Scheduled
Connected RPI
(ms)
Output
MultiCast
(T>O)
(pps)
Scheduled
Connected RPI
Input
(ms)
(O>T)
(pps)
(Note 1): When the value that is 16 times RPI (ms) is 10 s or more, RPI is calculated as 10 s.
Description
Shows the the communication load factor (%) of the whole unit.
Shows the communication volume per second "the total of Receivie (pps) and Send
(pps)" used for the whole unit in pps unit.
Shows the communication volume per second used for the whole system in Mbps.
The size including preamble, each header size, FCS and IFG (12 bytes) is calculated.
Shows the communication volume per second in the receiving direction used for the
whole unit "the total of I/O map communication output T>O (pps) and scan list input T>O
(pps) in pps unit.
Shows the communication volume per second in the sending direction used for the whole
unit "the total of I/O map communication input O<T (pps) and scan list output O<T (pps)
in pps unit.
Description
Shows the unit load factor of each tag (each instance) for each I/O map.
Shows the tag name or instance ID.
Shows the scheduled number of connected units.
Shows the set scheduled connected RPI.
Shows "●" when setting Multicast Communication to "Yes".
Shows the communication volume (pps) calculated in Scheduled Connected
RPI.
Shows the value that is 16 times output (T>O) RPI. (Note 1)
Shows the communication volume (pps) calculated in Scheduled Connected
RPI.
4.3 Various Setting Screens
④
4-15