Setting Procedure
3.3.3 Adding Target in Scan List
Add connected targets in the scan list. The following procedure is explained on the
assumption that the EtherNet/IP setting screen has been activated.
PROCEDURE
1. Select and right-click a registered target device (in this example, FP0H
CONTROL UNIT...) from Device List.
2.
Select "Add to Scan List" from the displayed menu.
The target will be added.
(Reference) The display content of the target added to Scan List
Node no.
Node Name
Connection Name
3-10
1
FP0H CONTROL UNIT AFP0HC32E
Input Only (Tag type)