Coating Materials List - Komatsu ecot3 PC300LC-8 Shop Manual

SEN02635-02

Coating materials list

a The recommended coating materials such as adhesives, gasket sealants, and greases used for disassem-
bly and assembly are listed below.
a For coating materials not listed below, use the equivalent of products shown in this manual.
Catego
Komatsu code
ry
LT-1A
LT-1B
LT-2
LT-3
LT-4
Holtz
MH 705
ThreeBond 1735
Aron-alpha 201
Loctite 648-50
LG-5
LG-6
LG-7
LG-8
ThreeBond
1207B
LG-9
ThreeBond
1206D
4
Part number Q'ty
790-129-9030 150 g
20 g
790-129-9050
(2pcs.)
09940-00030 50 g
Adhesive:1
790-129-9060
kg
(Set of adhesive
Hardener:
and hardener)
500 g
790-129-9040 250 g
790-129-9120 75 g
790-129-9140 50 g
790-129-9130 2 g
79A-129-9110 50 cc
790-129-9080 1 kg
790-129-9160 200 g
790-129-9170 1 kg
419-15-18131 100 g
790-129-9310 200 g
50 Disassembly and assembly
Container Main features and applications
q
Used to prevent rubber gaskets, rubber cush-
Tube
ions,and cork plugs from coming out.
q
Used for plastic (except polyethylene,poly-
Polyethyl- propylene, tetrafluoroethylene and vinyl chlo-
ene con- ride), rubber, metal, and non-metal parts
tainer which require immediate and strong adhe-
sion.
Polyethyl-
q
Features: Resistance to heat and chemicals.
ene con-
q
Use to fix and seal bolts and plugs.
tainer
q
Used to stick and seal metal, glass, and plas-
Can
tics.
Polyethyl-
q
ene con- Used to seal plugs.
tainer
q
Tube Heat-resistant seal used to repair engines.
q
Quick-setting adhesive.
Polyethyl-
q
Setting time: Within 5 sec. to 3 min.
ene con-
q
Used mainly to stick metals, rubbers, plas-
tainer
tics, and woods.
q
Quick-setting adhesive.
q
Polyethyl- Quick-setting type. (max. strength is ob-
ene con- tained after 30 minutes)
q
tainer Used mainly to stick rubbers, plastics, and
metals.
q
Polyethyl- Features: Resistance to heat and chemicals.
q
ene con- Used for fitted portions used at high temper-
tainer atures.
q
Use to seal various threaded portions, pipe-
Polyethyl-
joints, and flanges.
ene con-
q
Used to seal tapered plugs, elbows, and nip-
tainer
ples of hydraulic piping.
q
Features: Silicon-based heat and cold-resis-
tant sealant.
q
Tube Used to seal flange surfaces and threaded
portions.
q
Use to seal oil pan, final drive case, etc.
q
Features: Silicon-based quick-setting seal-
ant.
Tube
q
Used to seal flywheel housing, intake mani-
fold, oil pan, thermostat housing, etc.
q
Features: Silicon-based, heat and cold-resis-
tant, vibration-resistant,
Tube
sealant.
q Use to seal transfer case, etc.
q
Used for rough surfaces such as the circle
gear top seal which does not need to be
Tube clamped, water resistance of the clearance at
the welded area, etc.
q
Can be coated with paint.
(Rev. 2009.02)
impact-resistant
PC300, 350-8