Siemens SINAMICS S120 Equipment Manual page 7

Target group
This documentation is intended for machine manufacturers, commissioning engineers, and
service personnel who use the SINAMICS drive system.
Benefits
This manual provides all the information, procedures and operational instructions required
for commissioning and servicing SINAMICS S120.
Standard scope
The scope of the functionality described in this document can differ from the scope of the
functionality of the drive system that is actually supplied.
● Other functions not described in this documentation might be able to be executed in the
drive system. This does not, however, represent an obligation to supply such functions
with a new controller or when servicing.
● The documentation can also contain descriptions of functions that are not available in a
particular product version of the drive system. The functionalities of the supplied drive
system should only be taken from the ordering documentation.
● Extensions or changes made by the machine manufacturer must be documented by the
machine manufacturer.
For reasons of clarity, this documentation does not contain all of the detailed information on
all of the product types. This documentation cannot take into consideration every
conceivable type of installation, operation and service/maintenance.
Technical support
Country-specific telephone numbers for technical support are provided in the Internet under
Contact:
https://support.industry.siemens.com/sc/ww/en/sc/2090
EC declaration of conformity
The EC Declaration of Conformity for the EMC Directive and the Low-Voltage Directive are
available on the Internet at:
https://support.industry.siemens.com/cs/ww/en/ps/13231/cert
Alternatively, you can contact the Siemens office in your region in order to obtain the EC
Declaration of Conformity.
Note
Complying with the low-voltage directive
In the operational state – and when installed in dry electrical rooms – SINAMICS S devices
are in compliance with 2014/35/EU.
Water-cooled chassis power units for common cooling circuits
Manual, 08/2017, 6SL3097-4AM10-0BP0
Preface
7