Parameters - Siemens SINUMERIK 840D Programming Manual

3
Milling Cycles
3.16 Swiveling – CYCLE800 (SW 6.2 and higher)

3.16.3 Parameters

Programming
CYCLE800(_FR, _TC, _ST, _MODE, _XO, _YO, _ZO, _A, _B, _C, _X1, _Y1, _Z1, _DIR)
Parameters
_FR
_TC
_ST
_MODE
3-234
int Retraction
Value: 0...Do not retract
1...Retract axis Z (default)
2...Retract axis Z, X, Y
1) can be adjusted in user cycle TOOLCARR
String[20] Name of swivel data record
" Swivel data record 1 (default)
"HEAD1" Name of swivel data record
"0" Deselection of data record
int Swivel plane
UNITS DIGIT:
Value: 0... new
1... additive
TENS DIGIT
Value: 0x...Do not correct tool tip
1x... Correct tool tip
HUNDREDS DIGIT:
Value: reserved
2) Precondition: Option TRAORI must be available
int Swivel mode
Value: 0x...axial (default)
4x...Solid angle
8x...Projection angle
Evaluation of angle:
7 6 5 4 3 2 1 0
Note Bits 0 to 5 have no meaning for solid angle
1)
1)
2)
:
01: Rotation around 1
10: Rotation around 2
11: Rotation around 3
01: Rotation around 1
10: Rotation around 2
11: Rotation around 3
01: Rotation around 1
10: Rotation around 2
11: Rotation around 3
00: Swivel angle per axis (_A, _B, _C)
01: Solid angle (_A, _B)
10: Angle of projection (_A, _B, _C)
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
3
12.97
11.02
axis
st
Angle of
axis
nd
rotation 1
axis
rd
axis
st
Angle of
axis
nd
rotation 2
axis
rd
axis
st
Angle of
axis
nd
rotation 3
axis
rd
© Siemens AG, 2002. All rights reserved