User Cycle Toolcarr.spf - Siemens SINUMERIK 840D Programming Manual

3
12.97
11.02

3.16.5 User cycle TOOLCARR.spf

Customization by the machine manufacturer
All axis positions during swiveling are traversed by
means of user cycle TOOLCARR.spf. This is called
from the swivel cycle CYCLE800 or E_TCARR
(ShopMill) or F_TCARR (ShopTurn). The cycle can be
modified by the user (machine manufacturer during
start-up) in order to cater to the properties of specific
machines.
If the user cycle is not modified, during retraction before
swiveling, axis Z (marker _M41) or axis Z is moved first,
followed by axes X, Y (marker _M42).
The positions correspond to the start-up menu
CYCLE800 "Kinematics" à retraction positions.
Input screen form ShopMill/ShopTurn Input screen form standard CYCLE800
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
3.16 Swiveling – CYCLE800 (SW 6.2 and higher)
Structure (coarse) swivel cycles
E_TCARR.spf
(F_TCARR.spf)
Cycle end
CYCLE800.spf
3
Milling Cycles
TOOLCARR.spf
Mark: _M01..._M11
Mark: _M20..._M42
3-253