Siemens SINUMERIK 840D Programming Manual page 33

1
12.97
Programming example
Cycle support for the cycle:
corresponds to the COM files SW4
MMC 100/MMC 100.2 and cycle support ASCII
Editor MMC 102/103
//C6(CYCLE85)
(R///Retraction plane, absolute)[Retraction plane/RTP]
(R///Reference plane, absolute)[Reference plane/RFP]
(R/0 99999//Safety distance, without sign)
[safety distance/SDIS]
(R///Final drilling depth, absolute)[Final drilling depth/DP]
(R/0 99999/0/Final drilling depth relative to reference plane)[Final
drilling depth rel./,DPR]
(R/0 99999//Dwell at drilling depth)[Dwell BT/DTB]
(R/0.001 999999//Feedrate)[Feedrate/FFR]
(R/0.001 999999//Return feedrate)[Return feedrate/RFF]
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
1.4 Cycle support in program editor (SW 4.3 and higher)
General
Boring 1
1
1-33