Siemens SINUMERIK 840Di sl Function Manual page 103

12/2008
Field
Number of lines
Name
Memory requirements
(single monitor)
Performance
(single monitor)
Clock icon
(single monitor)
Single monitor status
(activation state)
Synchronization status
(single monitor)
Note
The PLC performance index allows you to define how much performance may be
used for the ePS PLC trigger. Each ePS PLC trigger uses a certain number of
performance points. In this way you can control to what extent the PLC may be
occupied by the ePS PLC trigger.
The PLC performance index can be defined on an individual basis, since the
amount of memory and the cycle time guaranteed for ePS Network Services may
vary depending on the performance of the control and the processes executed on
it.
Fig. 3-18: Exchanging addresses in notifications
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
Content
The number in the display indicates
the number of lines per screen that
can be shown in this menu. You can
select up to 200 lines. A scroll bar will
then be displayed on the screen.
Names of the control monitors
Used memory requirement of monitor
for:
• PLC trigger configurations
• PLC trace configurations
• PLC data
Currently used PLC performance.
Display indicating whether the control
monitor has triggers that are
independent of the common start
date:
No display: No
Faded display: Yes, at least one
Normal display: Yes, all
Monitor runs on the machine or is
inactive.
An exclamation point indicates that
the configuration currently stored is
not yet effective on the machine.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
SELECTION
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
3-103