Copying Functions To Multiple Machines - Siemens SINUMERIK 840Di sl Function Manual

12/2008

3.6.2 Copying functions to multiple machines

Description of functions
This function copies any selection of configurations that the user has created
previously from a so-called source machine to a freely definable group of machines
on a 1:1 basis.
Single or several user functions can be copied concurrently or successively. Any
source machine and any target machines to which the user has access can be
selected for copying.
Fig. 3-54: Copying to multiple machines
Field
Source machine
+/-
Target machines
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
Content
All configurations are listed in groups.
Selecting a group displays all
configurations contained within the group
and preselects them for copying. This
preselection can be switched on and off by
selecting the group.
Selecting +/- displays the configurations in
a group or hides the display.
To preselect for copying, select an
individual configuration. This preselection
can be switched on and off by selecting an
individual configuration.
All selected target machines are listed. The
target machines are selected in the 'Select
machine' menu.
In this menu, the group of target machines
is defined by selecting one or more
machines (see Selecting a machine).
3 Setting up functions
3.6 Copying
Type
DISPLAY
DISPLAY
DISPLAY
3-157