Siemens SINUMERIK 840Di sl Function Manual page 139

12/2008
Field
File size per file
File name with
complete path on the
control
Delete
Add / change
Description of "Upload HMI action log" function"
The current HMI action log file can be specifically uploaded to the ePS server with
the trigger event.
This action type has no configurable parameters.
In the column with the paper clip, the HMI action log file can be marked for sending
as an attachment for a notification of the workflow for this control monitor.
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
Content
Determines the maximum size for
each file to be uploaded:
The file size must be specified
between 1 MB and 10 MB.
If a file does exceed the maximum
value, it will not be loaded onto the
ePS server.
Shows the files entered with path
details for uploading purposes
Option: The list of specified files can
be sorted in ascending or descending
order (triangle).
Deletes a file for uploading from the
list.
In the line for editing, the complete
path, right up to the file to be
uploaded with its file type identifier,
must be entered in DOS syntax (but
including special characters and with
more than 8 characters).
Note:
The syntax shown below, which is
different, can be used for the purpose
of uploading files from the NC file
system:
../NC/Directory.dir/Subdire
ctory.dir/ <file.extension>
The system automatically determines
the current storage location of the file
(hard disk/NC SRAM) and the file is
loaded from there.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
INPUT
(Digits from
1 to 10)
DISPLAY
INPUT
ACTION
DISPLAY
INPUT
3-139