Remote Control Via The Keyboard - Siemens SINUMERIK 840Di sl Function Manual

12/2008

2.5.7 Remote control via the keyboard

Description of functions
In a service session the special function keys on the operator keyboard can also be
operated using the keyboard of the service PC via remote access. The following
table shows the keys on the PC to which the horizontal and vertical softkeys and
the special keys for the SINUMERIK keyboard are mapped.
Fig. 2-49: Special keys
Key
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
Meaning
Area switchover key
You can call the main menu from any operating area by
pressing this key. Pressing the key twice in succession
changes from the current operating area to the previous one
and back again.
Etc. key
Expansion of the horizontal softkey bar in the same menu.
<Recall> key
The <Recall> key goes to the next highest menu. It also closes
a window.
Machine area key
Direct jump to the "Machine" operating area.
2 Maschine information
2.5 Remote access
2-77