Equability Test - Siemens SINUMERIK 840Di sl Function Manual

2 Maschine information
2.2 Variable monitors - Measurements and measurement series

2.2.5 Equability test

Description of functions
The equability test result returns the torque/force measurement curve over the axis
position and various torque characteristics. The characteristics are determined for
each direction of movement separately. If nothing else is described for the
characteristics, the characteristics refer to the position range without the
acceleration and braking ramps.
Characteristic
Maximum torque
Minimum torque
Average torque
Standard deviation
Increase in the linear
trend of torque
characteristic
Maximum torque of the
acceleration ramp
2-44
Meaning
The maximum returns the maximum torque in the
measured position range. With torque characteristics
with linear trend, the proportion the trend is computed
for determining the maximum torque.
The minimum returns the minimum torque in the
measured position range. With torque characteristics
with linear trend, the proportion of the trend is
computed for determining the minimum torque.
The characteristic returns the mean torque in the
measured position range with the configured speed.
Independently of the direction, a larger value always
corresponds to a larger torque in the direction of
movement.
The characteristic represents the standard deviation of
the torque characteristic in the measured position
range at the configured speed. With torque
characteristics with a linear trend, the proportion of the
trend is eliminated from the standard deviation.
The characteristic indicates the increase in the change
to the torque at position changes.
The characteristic indicates the maximum torque which
is run in the acceleration ramp.
ePS Network Services, Function Manual (FH) - Release 12/2008
© Siemens AG 2008 All Rights Reserved
12/2008