Fuel System Maintenance; Draining Water From The Fuel Filter - Toro Greensmaster 3250-D Operator's Manual

2-wheel drive traction unit
Hide thumbs Also See for Greensmaster 3250-D:
Table of Contents

Advertisement

Figure 35
1. Drain plug
2.
Remove the oil filter. Apply a light coat of clean
oil to the new filter gasket.
3.
Screw the filter on by hand until the gasket
contacts the filter adapter, then tighten 1/2 to 3/4
turn further. Do not overtighten.
4.
Add oil to the crankcase; refer to
Engine Oil and Filter (page
5.
Dispose of the used oil and filter properly.
g016422
2. Oil filter
Changing the
35).
Fuel System
Maintenance
Draining Water from the
Fuel Filter
Service Interval: Before each use or daily
1.
Position the machine on a level surface and shut
off the engine.
2.
Place a drain pan under the fuel filter.
3.
Open the drain plug on the fuel filter
approximately one turn and drain any
accumulated water
1. Fuel filter
4.
Tighten the plug after draining.
Note:
Because the accumulated water will be
mixed with diesel fuel, drain the fuel filter into a
suitable container and dispose of it properly.
36
(Figure
36).
Figure 36
g007367

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

04384

Table of Contents