Setup - Toro Greensmaster 3250-D Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Description
Seat
Nut (5/16 inch)
No parts required
Roll bar
Bolt (5/8 x 4-1/2 inch)
Locknut (5/8 inch)
No parts required
Carrier frame
Spacer
Bolt (1/2 inch x 3-1/4 inches)
Locknut (1/2 inch)
No parts required
No parts required
Offset lift hook (Refer to the Cutting Unit
Operator's Manual for the installation
instructions)
Screw (supplied with the cutting unit)
Bolt (#10 x 5/8 inch)
Jam nut (#10)
Cutting unit (sold separately)
Ball stud (supplied with the cutting unit)
Grass basket
No parts required
No parts required
Rear Weight Kit (Part No. 100-6442 or
Part No. 99-1645; purchase separately)
Calcium chloride (purchase separately)
CE Guard Kit (Part No. 04441; purchase
separately)
Warning decal (Part No. 136-8505)
CE mark decal
No parts required
Qty.
1
Mount the seat to the base.
4
–
Activate and charge the battery.
1
4 Install the roll bar.
4
–
Reduce the tire pressure.
2
2
Mount the front carrier frames.
2
2
–
Adjust the carrier frame rollers.
–
Install the oil cooler (optional).
3
6
1
Install the cutting units.
1
3
6
3
–
Mark the outer grass baskets.
–
Adjust the transport height.
1
Add rear ballast.
18 kg (40
lb)
1
Install the CE Guard Kit.
1
Install the CE decals (if required).
1
–
Burnish the brakes.
9
Use