Mvme2400 Base Board Preparation; Table 1-3. Jumper Settings - Motorola MVME2400 Series Installation And Use Manual

MVME2400 Base Board Preparation

Figure 1-1
connectors, and LED indicators on the MVME240x. Manually
configurable items on the base board are listed in the following table. Refer
to the sections or figures listed along side the jumper function for more
information.
Jumper
J8
J9
S3
The MVME240x has been factory tested and is shipped with the
configurations described in the following sections. The MVME240x
factory-installed debug monitor, PPCBug, operates with those factory
settings.
http://www.motorola.com/computer/literature
illustrates the placement of the switches, jumper headers,

Table 1-3. Jumper Settings

Flash Bank Selection (J8) on page 1-9
System Controller Selection (J9) on page 1-9
Software-Readable Header (SRH) Switch (S3) on page 1-10
MVME2400 Base Board Preparation
Function
1
1-7