Huawei MA5600 Manual page 103

NGN Cases
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/md/dsk/d20 - - swap - no -
/dev/md/dsk/d10 /dev/md/rdsk/d10 / ufs 1 no -
/dev/md/dsk/d40 /dev/md/rdsk/d40 /export/home ufs 2 yes -
/dev/md/dsk/d30 /dev/md/rdsk/d30 /opt ufs 2 yes -
/dev/md/dsk/d60 /dev/md/rdsk/d60 /opt/n2000 ufs 2 yes -
/dev/md/dsk/d50 /dev/md/rdsk/d50 /opt/sybase ufs 2 yes -
swap - /tmp tmpfs - yes -
To restart the SUN server, run the following commands:
#sync;sync;sync;sync
# shutdown –y –g0 –i6
After the SUN server is started, you can start the N2000 BMS normally. To synchronize disk
c1t0d0s2 and disk c1t2d0s2, run the following commands:
#metattach d10 d12
#metattach d20 d22
#metattach d30 d32
#metattach d40 d42
After the preceding operations are performed, the third disk becomes the mirrored disk of the
first disk and the fourth disk becomes the mirrored disk of the second disk.
Suggestions and
Null
Summary:
6.19 FAQ-How to Enable the SSH and SFTP Functions on Solaris 10
Title:
FAQ-How to Enable the SSH and SFTP Functions on Solaris 10
ID: SE0000365202
Update Time: 2008-12-23 10:40:54
Author: y59742
Product Family: Access Network Management System
Fault Type: Service Management
Keywords: Solaris 10, SSH, SFTP
Phenomenon De
Q:
scription:
How to use SFTP to transfer files to the server after logging in to the server through the SSH on
the N2000 BMS client?
Alarm Informat
Null
ion:
Cause Analysi
Null
s:
Handling Proce
A:
ss:
By default, Solaris 10 supports the SSH startup and configuration functions. You need to modify
related items of the /etc/ssh/sshd_config configuration file and use the ssh-keygen file on the
SSH to generate a key. After restarting the SSHD service, you can log in to the SSH and use
SFTP to transfer files if you pass the password authentication.
1. To check whether the SSH and the SFTP services are running, run the following command:
#ps -ef | grep sshd
If a process ID is displayed, it indicates that the process is running.
2. Modify the following items in the /etc/ssh/sshd_config file:
PermitRootLogin yes //allows users to log in to the SSH as user root
PasswordAuthentication yes //uses the password authentication mode
3. To restart the SSH service of the server, run the following command:
# ps -ef |grep sshd
The following message is displayed:
root- 9280---- 1- 0-- Aug 08 ?------- 0:01 /usr/local/sbin/sshd
root 11179 10028- 0 17:31:02 pts/8--- 0:00 grep sshd
98
Confidential Information of Huawei. No Spreading without Permission
Chapter 6 iManager N2000 BMS Cases
Product: iManager N2000 BMS