A Port Of The H813E Cannot Forward Packets Normally Because The Native Vlan Of The Port Is The Same As The Multicast Vlan - Huawei MA5600 Manual

Access network product cases
Table of Contents

Advertisement

MSAN UA5000 Cases
Cause Analysi
1. The capability set profile of the MA5680T or the ONT profile does not match that of the
s:
HG810e.
2. The port of the HG810e is faulty.
Handling Proces
1. Check the ONT profile configured on the MA5680T. The current ONT profile does not
s:
match that of the HG810e normally. The matched profile of the HG810e is an ONT
profile providing a GE port. The current ONT profile, however, only provides an FE port.
As a result, after the ONU is powered off, the network port of the PC connected to the
port of the ONU cannot be activated in the auto-negotiation mode, but activated only
after set to the 100 M full-duplex mode forcibly.
2. Run the following command to reconfigure the capability set profile of an ONT
connected to the EPON port and bind the profile to the ONT. That is, the profile matching
the capability attribute of the ONT can be specified.
ont-profile add epon [ profile-id profile-id | profile-name profile-name ]
3. Configure a profile providing a GE port that matches the profile of the HG810e. As a
result, the ONU goes online normally. The network port of the PC need not be set
forcibly and the ONU can get online again after the ONU is powered off.
Suggestions and
Null
Summary:
3.19 A Port of the H813e Cannot Forward Packets Normally Because the Native VLAN of
the Port Is the Same as the Multicast VLAN
A Port of the H813e Cannot Forward Packets Normally Because the Native VLAN of
Title:
the Port Is the Same as the Multicast VLAN
ID: SE0000374103
Information
Troubleshooting Cases
Type :
Product Family: Optical Access
Fault Type: EPON Access Service
Keywords: MAC, forwarding exception
Permission
01Huawei Engineers Permission
Level:
Phenomenon De
In an office, the MC (video phone) is connected to the H813e. The MC cannot obtain the
scription:
IP address through DHCP and the OLT cannot learn the MAC address of the MC. Use a
PC to replace the MC. The fault persists. The STB service of the H813e is normal. The
networking is MC-> H813e->optical splitter->MA5606T. Packets sent from the MC do
not contain tags. The VLAN 2103 tag, which is also the tag of the multicast service, is
added to the packets on the H813e. The tag of the STB service is VLAN 2104.
Alarm Informatio
Null
n:
Cause Analysi
The MA5606T cannot learn the MAC address of the MC connected to a port of the
s:
MA5606T, but the STB service of the H813e connected to the MA5606T is normal.
Therefore, the causes of the fault are as follows:
1. The port of the H813e is faulty.
2. The configuration is incorrect.
Confidential Information of Huawei. No Spreading without Permission
Chapter 3 GPON FTTx Cases
Quality Level:
C
Product: MA5680T
57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ma5600t

Table of Contents