Faq- Why Configurations Are Lost When Using Save Configuration Command - Huawei MA5600 Manual

NGN Cases
For how to select the analog parameter ID when running this command, see the Command
Reference of the corresponding device. For example, the Command Reference of the MA5600
provides the following description:
0: is the default inner analog parameter fixedly allocated to the temperature sensor by the system
and cannot be modified by the user.
1-4: are allocated to the voltage sensor by default.
1 indicates number 0 -48 V input.
2 indicates the first -48 V input.
3 indicates the second -48 V input.
4 indicates the third -48 V input.
5-8: are user-defined analog parameters for allocating to other extended analog sensors, such as
humidity sensor.
More information:
1. The H303ESC has a built-in humidity sensor. The built-in sensor is located in J5 of the board and
its analog parameter ID is 2. The H303ESC can also be connected to an external humidify sensor
and the connection and configuration methods are the same as what the preceding describes.
Without the built-in humidity sensor, the H304ESC is a simplified H303ESC and must be connected
to an external one.
2. The differences between the H304ESC and the H303ESC are that the LED of the H303ESC is
red and the LED of the H304ESC is green.

1.23 FAQ- Why configurations are lost when using save configuration command

Title: FAQ- Why configurations are lost when using save configuration command
ID: SE0000364112
Information Type : Troubleshooting Cases
Update Time: 2008-12-23 10:44:56
Views: 16
Author: A.Rahman Alaa
Product Family: Broadband Access
Fault Type: Others
Keywords: Save configuration
Permission Level: 03Equipment Users Permission
Phenomenon Descr
Q:
iption:
why configurations are lost when using "save configuration " command at SmartAX MA5600?
Alarm Informatio
Null.
n:
Cause Analysis: Null.
Handling Proces
A :
s:
After entering this command and resetting the DSLAM; all configuration will be lost where the DSLAM will not consider the n
Active configuration
"Save Configuration" command is used to save the current system configuration file. When you need to save the configurati
Suggestions and
1- The configurated data is saved in the configuration file in the command line form, including the data type, value of parame
Summary:
2 - Before the progress for saving is complete, do not power off or reset the system by force. Otherwise the data saved in th
3 - Run the "active configuration" command to activate the saved configuration file. The configuration file takes effect after th
4 - Run the "display current-configuration" command to query the configuration information.
24
Confidential Information of Huawei. No Spreading without Permission
Chapter 1 MA5600 Cases
Quality Level:
C
Product: SmartAX MA5600