Siemens SIMATIC Field PG P4 Manual page 115

If there is no operating system installed, then please do the following:
1. Insert the Recovery CD into your CD-ROM drive and start the device.
2. To boot from the Recovery CD, press the ESC key when the BIOS message:
Press <F2> to enter Setup
is displayed. On the completion of initialization, a "Boot Menu" appears.
3. Select the "CD-ROM Drive" with the cursor.
4. When "Microsoft Windows 98 Startup Menu" is displayed, select
"1. Boot for CD-Recovery".
If the hard disk has not been installed, first select "2. Boot for FDISK, FORMAT
or Windows-Setup (Section 8.2.3).
5. You have to acknowledge the "SIEMENS End User License Agreement" with
the F8 function key. Pressing ESC allows you to decline the agreement and
cancels the installation.
6. In the next screen you can select the components which are to be copied from
the CD to the hard disk. Transfer of at least the folder "I386" is necessary for
the Windows XP installation or setup.
7. Select the drive for data transfer. The selected drive is not the installation drive
for Windows. For the Windows setup, you need an available disk space of
approximately 1500 MB on the installation drive for Windows.
Notice
By default, drive C: is used for the data transfer (Recovery).
Ensure that there is an available disk space of approximately 1500 MB left on
drive C: after the selected recovery data have been copied.
8. Confirm the end message box.
9. Start the Windows setup program
LW:\I386\WinNT.bat
LW is the drive where the recovery data have been copied.
10.Now follow the screen instructions.
Setting the Language Selection for Windows XP Professional
The Multilanguage User Interface (MUI) allows you to set the Windows XP
Professional menus and dialogs to another language.
In order to install the MUI, run the program MUISETUP.EXE in the
CD_DRIVE:\MUI folder on the Recovery CD "MUI german" or in the root directory
on the Recovery CD "MUI Windows XP". Please follow the screen dialog to install
the desired languages.
SIMATIC Field PG P4 Manual
A5E00180080-04
Reinstallation of the Software
8-11