3.5
Panel "Field PG"
Panel "Field PG" helps you to work better with the Field PG P4. It has the
following functions:
• Automatic execution of battery calibration.
• Setting the display brightness
• CPU and motherboard temperature display
• Setting the hardware properties of the PC Card and the MPI and Ethernet
interface
• Display of firmware versions
• Selecting the display device (display / external monitor)
The Panel is installed on devices with Windows XP and Windows 2000.
• Start the program via Start > Settings> Control panel> Field PG.
You can find additional support during operation in the respective Online Help.
SIMATIC Field PG P4 Manual
A5E00180080-04
Configuring And Operating The SIMATIC Field PG P4
3-11