Installation; Guide Of Customer; Select A Best Location; Duct Mount Instruction - Beko BX 109 C Installation Manual

7

Installation

7.1 Guide of customer

• The customer should have a qualified power supply coincident with that printed on the tag of the
air conditioner.
• Must use special circuit and efficient grounding outlet matching with the plug of the air conditioner.
• The appliance should be installed in accordance with national wiring regulation.
• The plug should be easily accessible after installation.

7.2 Select a best location

1. Install the mobile air conditioner in a flat and spacious location where the air outlets will not be
obstructed.
2. A minimum clearance of 50cm from walls or other obstacles should be kept.
3. The gradient can't be more than 10 degrees with the horizontal plane, while placing and using the
unit.
Uneven ground may cause additional noise or vibration, or lead to damage to the unit.
Note:
C
1. The air conditioner shall not be used in the laundry.
2. The plug shall be accessible after the unit is positioned.

7.3 Duct mount instruction

• In cooling, heating and drying mode, the exhaust duct needs to be installed while in fan mode, the
exhaust duct is not needed.
• According to the actual needs, the exhaust duct can be moderately compressed and tensed, but
cannot be arbitrarily stretched and bent.
• The exhaust duct can be connected with Windows or installed into the wall. Based on accessories of
the unit you buy and the actual needs, you can make the installation.
30 / 88 EN
Mobile room air conditioner / Installation Manual